Details

The general standard is that it is difficult to enter office buildings. In order to meet the customer's requirements. Manufacturers of high and low temperature test chambers can produce component types. 1. Place the test box controller on the top, and the width on both sides can be reduced by about 20 centimeters. 2. Separate the test chamber studio from the refrigeration system, and the height can be reduced by half of the total height of the equipment.

Therefore, when selecting a high and low temperature test chamber, users not only need to consider the test, but also the placement location of the test chamber. If the size of the door and elevator is not enough, can the doors and windows be removed, and can lifting be used. If it is not possible, a suitable volume of test chamber should be selected based on the test and door size, and it should be made into a detachable high and low temperature test chamber on the left, right, or up and down sides. These all require detailed communication and confirmation between users and manufacturers.